The waterproofing of the shower room needs to start the foundation construction. First of all, if the wall of the bathroom is new, you must pour concrete beams before building the wall, then build walls on the beams. The resulting cracks in the walls, which in turn destroy the waterproof coating. Secondly, when waterproof, all waterproof measures should be taken on the wall sprinklers are installed 180 cm the ground.
The ground must be levelled dust impurities cleaned before waterproofing. After the first waterproofing, cover the waterproof layer with 1:2 cement mortar, then perform the second waterproofing. Waterproof all over. After this treatment, then paste the brick, the general waterproof layer will break. Deodorizing floor drains need to be stored several times before use. After many long-term water storage tests, no water accumulation phenomenon, can be safely used.
When the shower room is decorated on the ceiling, aluminum gusset plates with waterproof moisture-proof effects are the choice. This material can only make the air circulation in the shower room, but also minimize the occurrence of condensation. Families with sufficient decoration budget can also choose to make drywall ceiling. Xiao Bian reminds everyone to pay attention to the application of waterproof putty before making the ceiling. Avoid PVC ceilings with poor water resistance, which often condenses drips.
The appliances in the shower room need to be in frequent contact with water vapor, so it is necessary to choose products with stainless steel shells when purchasing. Products made of this material are easily corroded have a long service life. If there are no special circumstances, try to over-transform the original pipe of the shower room. If the pipe is modified, the joint must be tightly sealed to avoid water seepage. The interior decoration of the shower room should use as little wood as possible. When it must be used, it is necessary to add a waterproof coating to the wood material.
